Off-the-shelf & Custom Infrared Lens, thermal imaging cameras & systems components
Laser Range Finder 9V-16V 1535nm LRF G1535 3S
Laser Range Finder 9V-16V 1535nm LRF G1535 3S
- Name
- Tel
- *Title
- *Content
Laser Range Finder 9V-16V 1535nm LRF G1535 3S
| Categories | Laser Range Finder |
|---|---|
| Brand | Quanhom Optronics |
| Model | LRF G1535 3S |
| Power Supply | 9V-16V |
| Continuous Ranging Frequency | 1-10Hz(adjustable) |
| Operating Temperature | -40℃-+65℃ |
| Update Time | Apr 24,2024 |
- Specifications
- Download file
- FAQ
- Video
- Applications
Performance |
|||
|
Performance range [m]:
|
|
||
Continuous ranging frequency | adjustable from 1Hz to 10Hz | ||
Wavelength | 1535nm | ||
Laser divergence Angle | ≤0.5mrad | ||
Accuracy Rate | ≥98% | ||
Ranging accuracy | ≤±1m (RMS) | ||
Minimum range | ≤50m | ||
Ranging resolution | ≤30m | ||
Operating Temperature | -40℃～+65℃ | ||
Storage Temperature | -55℃～+70℃ | ||
Weight | ≤55g | ||
Size | ≤51.5mm×26mm×41.5mm | ||
Power Supply voltage | DC9V-16V | ||
Power | average power
consumption ≤1.5W, peak power consumption ≤5W | ||
Communication interface | RS422, 115200bps | ||
Rate of work | Average working rate≤1.5W, working efficiency≤5W | ||
|
file name
|
type |
download
|
||
PDF format |
|
|||
There are many reasons why the lens
autofocus is not clear, the main reasons are as follows which can be checked
one by one:
1. During the focusing process, there is
a large moving target in the lens screen (occupying more than 1/3 of the
picture), which can be refocused；
2. If the lens is used for a long time,
the gear, CAM and other transmission parts wear and tear, resulting in unclear
focus, the module or control board parameters can be adjusted to make the focus
clear again;
3. Hardware problems, such as the potentiometer
does not work, replace the hardware that does not work.
There are many reasons why the lens
control board and the computer cannot be connected, the main reasons are as
follows which can be checked one by one:
1. Replace the USB port, which may be
incompatible with the data cable；
2. Replace the data cable, maybe the
data cable is not compatible with the computer or the cable data is wrongly
selected；
3. Confirm the wiring of the module or
the control board, maybe the wiring is loose；
4. Module or control board hardware
problem, replace the hardware.
- Loading...
