Off-the-shelf & Custom Infrared Lens, thermal imaging cameras & systems components

Home / All / Thermal IR Optronics Related Components / LWIR Thermal Camera Module /

LWIR Infrared Thermal Camera Module丨640*512 12μm

Home / All / Thermal IR Optronics Related Components / LWIR Thermal Camera Module /

LWIR Infrared Thermal Camera Module丨640*512 12μm

Find Your Product
Whatever your requirements, our know-how, expert team, and technology are all there, ready to provide you with the precise, fully-tailored solution you need.
Please send your message to us
*Email
Name
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

LWIR Infrared Thermal Camera Module丨640*512 12μm

LWIR Infrared Thermal Camera Module丨640*512 12μm
CategoriesLWIR Thermal Camera Module
BrandQuanhom Optronics
ModelITZ6412
Detector TypeUncooled focal plane
Pixel Pitch12μm
Resolution640x512
Size41x41x28.5mm
Analog video outputCVBS
Digital video outputBT656
Update TimeMay 21,2024
Detail Information
  • Specifications
  • Download file
  • FAQ
  • Video
  • Applications
Specifications

Detector characteristic

Detector type
Uncooled focal plane
Resolution
640*512
Pitch Size
12μm
Spectral Range
8-14μm
Image Frequency
25Hz
NETD
<50mK(@f1.0,50Hz,300K)
Video Output
Analog: CVBSDigital: BT656
Power Supply
DC 12V
Power Consumption
≤1.5W
Size(LxWxH)
≤41x41x28.5(mm)
Operating Temperature
-40℃ to +70℃
Storage Temperature
-45℃ to +85℃
Download document
file name
type
download
LWIR Infrared Thermal Camera Module丨ITZ6412 640*512 12μm
PDF
FAQ
- Why the lens autofocus is not clear?

There are many reasons why the lens autofocus is not clear, the main reasons are as follows which can be checked one by one:

1. During the focusing process, there is a large moving target in the lens screen (occupying more than 1/3 of the picture), which can be refocused;

2. If the lens is used for a long time, the gear, CAM and other transmission parts wear and tear, resulting in unclear focus, the module or control board parameters can be adjusted to make the focus clear again;

3. Hardware problems, such as the potentiometer does not work, replace the hardware that does not work.

- Why cannot the lens control board or module connect to the computer?

There are many reasons why the lens control board and the computer cannot be connected, the main reasons are as follows which can be checked one by one:

1. Replace the USB port, which may be incompatible with the data cable;

2. Replace the data cable,maybe the data cable is not compatible with the computer or the cable data is wrongly selected;

3. Confirm the wiring of the module or the control board, maybe the wiring is loose;

4. Module or control board hardware problem, replace the hardware.

APPLICATIONS
Airborne
Sample Content
Enhanced Vision
Sample Content
Homeland Security
Sample Content
Maritime & Naval
Security & Surveillance
Thermal Imaging Body Temperature Screening
Review
  • Loading...