Custom Infrared Lens, thermal imaging cameras & systems components

Home / all / Other Opto Infrared Components / SWIR Lens /

SWIR Manual Continuous Zoom Infrared Lens 300mm f/6.0

Home / all / Other Opto Infrared Components / SWIR Lens /

SWIR Manual Continuous Zoom Infrared Lens 300mm f/6.0

SWIR Manual Continuous Zoom Infrared Lens 300mm f/6.0

SWIR Manual Continuous Zoom Infrared Lens 300mm f/6.0
CategoriesSWIR Lens
BrandQuanhom Optronics
ModelGSW30060
SWIR Lens300mm f/6.0
ApplicationsSecurity and Surveillance
Mechanical InterfaceThread
Update Time2022/10/6
Detail Information
  • Specifications
  • Download file
  • FAQ
  • Video
  • Applications
Specifications
HFOV
640x512
1280x1024
1920x1280
12μm
1.5°
10μm
1.2°
2.4°
5μm
1.2°
1.8°

Optical

Focal Length[mm]
300
F/#
6.0
Wave Length
0.9-1.7μm
Focus Range
5m-Infinity

Mechanical

Interface
Thread
Focus Mechanism
Manual
Dimensions [mm]
Φ51x141.5
Weight
<330g

Environmental

External Coating
AR
Sealing
IP67
Download document
file name
type
download
PDF
FAQ
- Why the lens autofocus is not clear?

There are many reasons why the lens autofocus is not clear, the main reasons are as follows which can be checked one by one:

1. During the focusing process, there is a large moving target in the lens screen (occupying more than 1/3 of the picture), which can be refocused;

2.If the lens is used for a long time, the gear, CAM and other transmission parts wear and tear, resulting in unclear focus, the module or control board parameters can be adjusted to make the focus clear again;

3. Hardware problems, such as the potentiometer does not work, replace the hardware that does not work.

- Why cannot the lens control board or module connect to the computer?

There are many reasons why the lens control board and the computer cannot be connected, the main reasons are as follows which can be checked one by one:

1. Replace the USB port, which may be incompatible with the data cable;

2. Replace the data cable, maybe the data cable is not compatible with the computer or the cable data is wrongly selected;

3. Confirm the wiring of the module or the control board, maybe the wiring is loose;

4. Module or control board hardware problem, replace the hardware.

APPLICATIONS
Airborne
Maritime & Naval Surveillance
Security & Surveillance
Review
  • Loading...