Off-the-shelf & Custom Infrared Lens, thermal imaging cameras & systems components

Home / All / Other Opto Infrared Components / QE/GE Eyepieces (Oculars) /

Eyepiece Focal Length 13.62mm Magnifications = 18.35×

Home / All / Other Opto Infrared Components / QE/GE Eyepieces (Oculars) /

Eyepiece Focal Length 13.62mm Magnifications = 18.35×

Eyepiece Focal Length 13.62mm Magnifications = 18.35×

Eyepiece Focal Length 13.62mm Magnifications = 18.35×
Eyepiece Focal Length 13.62mm Magnifications = 18.35×Eyepiece Focal Length 13.62mm Magnifications = 18.35×
CategoriesQE/GE Eyepieces (Oculars)
BrandQuanhom Optronics
ModelGE1805720M1
Focal Length13.62mm
Magnification18.35×
Eye Relief19.5mm
Update TimeMar 28,2024
Detail Information
  • Specifications
  • Download file
  • FAQ
  • Video
  • Applications
Specifications

Technical Specifications

Focal Length
13.62mm
Magnification
18.35×
Eye Relief
19.5mm
Pupil Diameter
6.5mm
OLED Size
0.5″
Weight
<100g
Download document
file name
type
download
PDF
FAQ
- Why the lens autofocus is not clear?

There are many reasons why the lens autofocus is not clear, the main reasons are as follows which can be checked one by one:

1. During the focusing process, there is a large moving target in the lens screen (occupying more than 1/3 of the picture), can be refocused;

2.If the lens is used for a long time, the gear, CAM and other transmission parts wear and tear, resulting in unclear focus, the module or control board parameters can be adjusted to make the focus clear again;

3. Hardware problems, such as potentiometer does not work, replace the hardware that does not work.

- Why can not the lens control board or module connect to the computer?

There are many reasons why the lens control board and the computer cannot be connected, the main reasons are as follows which can be checked one by one:

1. Replace the USB port, which may be incompatible with the data cable;

2.Replace the data cable,maybe the data cable is not compatible with the computer or the cable data is wrongly selected;

3. Confirm the wiring of the module or the control board, maybe the wiring is loose;

4.Module or control board hardware problem, replace the hardware.

APPLICATIONS
Hand-held Thermal Imaging Devices


Review
  • Loading...